Translations:KAVAN Dingo A3 glider kit 796mm - Instruction manual/25/en

Horizontal tailplane: If you are new to the dope and tissue business, you should start with the horizontal tailplane in order to gain the skills on smaller part of your model featuring no curves. Apply the thinned white glue or adhesive dope around the external edges of the lower side of the tailplane and to the ribs and centre plate. IMMEDIATELY set the tissue in position and smooth the edges with finger tips before it has a chance to dry. Cut the tissue all around the outline of the tailplane leaving it 4–5 mm over size. Bend and glue with thinned white glue or adhesive dope the overlapping tissue around the entire tailplane. Cover the upper side of the tailplane in the same manner. Bend and glue with thinned white glue or adhesive dope the overlapping tissue around the entire tailplane.