Translations:KAVAN Smart PRO T70 Dual battery switch with telemetry expander - Instruction manual/27/en: Difference between revisions

From KAVAN RC Wiki
 
(No difference)

Latest revision as of 11:56, 1 November 2024

Message definition (KAVAN Smart PRO T70 Dual battery switch with telemetry expander - Instruction manual)
Install the MAV Manager software and the USB drivers on your computer. Check the system requirements.
# Disconnect all devices attached to the battery switch.
# Connect the USB interface to your PC, run MAV Manager and select the correct COM Port.
# Connect the battery switch according to the picture below.
# Apply external power to the battery switch via B1 or B2 battery inputs.
# Select the appropriate *.BIN file and press the Update button.
[[File:Smart PRO T70 - Firmware update.png|center|frameless|960x960px]]

Install the MAV Manager software and the USB drivers on your computer. Check the system requirements.

  1. Disconnect all devices attached to the battery switch.
  2. Connect the USB interface to your PC, run MAV Manager and select the correct COM Port.
  3. Connect the battery switch according to the picture below.
  4. Apply external power to the battery switch via B1 or B2 battery inputs.
  5. Select the appropriate *.BIN file and press the Update button.
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_Smart_PRO_T70_Dual_battery_switch_with_telemetry_expander_-_Instruction_manual/27/en&oldid=25894"