Translations:KAVAN AP06A - Instruction Manual/35/en: Difference between revisions

Latest revision as of 10:24, 15 October 2025

Message definition (KAVAN AP06A - Instruction Manual)

==== Muffler Installation ====
The muffler is mounted to the engine using the wire retainer provided. To install the muffler, slide the loop end of the retainer over the top of the cylinder head and secure it between the lower cooling fins just above the cylinder sleeve bolts. Slip the muffler under the two hooks in the retainer and engage the hole in the side of the muffler with the exhaust port on the side of the engine. Slide the two hooks into the machined grooves in the muffler to secure it in place. The exhaust cone on the rear half of the muffler is adjustable to better match the installation in your particular model. This is a friction fit, so simply rotate the exhaust cone to the desired angle and leave it in place.

Muffler Installation

The muffler is mounted to the engine using the wire retainer provided. To install the muffler, slide the loop end of the retainer over the top of the cylinder head and secure it between the lower cooling fins just above the cylinder sleeve bolts. Slip the muffler under the two hooks in the retainer and engage the hole in the side of the muffler with the exhaust port on the side of the engine. Slide the two hooks into the machined grooves in the muffler to secure it in place. The exhaust cone on the rear half of the muffler is adjustable to better match the installation in your particular model. This is a friction fit, so simply rotate the exhaust cone to the desired angle and leave it in place.