Translations:KAVAN Alpha V2 1500mm - Instruction manual/44/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 1: | Line 1: | ||
=== | === Checking the current set-up === | ||
1. Assure that the transmitter is turned on, place all the trims in their neutral positions and set the throttle stick into the lowest position. Connect the flight pack to the ESC - the red LED on the receiver must glow. If it blinks or does not glow at all, the receiver and transmitter require establishing their link by the binding procedure - refer to the page 5 in this manual. | 1. Assure that the transmitter is turned on, place all the trims in their neutral positions and set the throttle stick into the lowest position. Connect the flight pack to the ESC - the red LED on the receiver must glow. If it blinks or does not glow at all, the receiver and transmitter require establishing their link by the binding procedure - refer to the page 5 in this manual. | ||
Latest revision as of 07:17, 20 October 2025
Checking the current set-up
1. Assure that the transmitter is turned on, place all the trims in their neutral positions and set the throttle stick into the lowest position. Connect the flight pack to the ESC - the red LED on the receiver must glow. If it blinks or does not glow at all, the receiver and transmitter require establishing their link by the binding procedure - refer to the page 5 in this manual.