Translations:KAVAN Alpha V2 1500mm - Instruction manual/130/en: Difference between revisions

From KAVAN RC Wiki
VisualWikitext
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
1. Throttle Signal Cable (White/Red/Black Tri-color Cable): Plug it into the throttle channel on the receiver. The White wire is for transmitting throttle signals, the Red & Black wires are BEC output wires.
# Throttle Signal Cable (White/Red/Black Tri-color Cable): Plug it into the throttle channel on the receiver. The White wire is for transmitting throttle signals, the Red & Black wires are BEC output wires.
# Reverse Brake Signal Wire/ Programming Cable (Yellow Wire):

Latest revision as of 07:17, 20 October 2025

Message definition (KAVAN Alpha V2 1500mm - Instruction manual)
# Throttle Signal Cable (White/Red/Black Tri-color Cable): Plug it into the throttle channel on the receiver. The White wire is for transmitting throttle signals, the Red & Black wires are BEC output wires.
# Reverse Brake Signal Wire/ Programming Cable (Yellow Wire):
  1. Throttle Signal Cable (White/Red/Black Tri-color Cable): Plug it into the throttle channel on the receiver. The White wire is for transmitting throttle signals, the Red & Black wires are BEC output wires.
  2. Reverse Brake Signal Wire/ Programming Cable (Yellow Wire):
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_Alpha_V2_1500mm_-_Instruction_manual/130/en&oldid=44431"