Translations:KAVAN SLING Mini 616mm - Instruction manual/50/en: Difference between revisions
Importing a new version from external source |
Importing a new version from external source |
||
| Line 1: | Line 1: | ||
==== 2. Receiver Installation ==== | ==== 2. Receiver Installation ==== | ||
[[File:Sling MINI - RX.png|right|frameless|420x420px]] | |||
Carefully press the canopy between your thumb and index finger in order to release the lock on each side to remove the canopy. Connect the S.BUS or DSM2 output cable of your receiver into the respective port on the decoder/servo board. You can secure your receiver to the canopy or into the fuselage behind the decoder/servo board using hook-and-loop tape or double-sided foam sticky tape. | Carefully press the canopy between your thumb and index finger in order to release the lock on each side to remove the canopy. Connect the S.BUS or DSM2 output cable of your receiver into the respective port on the decoder/servo board. You can secure your receiver to the canopy or into the fuselage behind the decoder/servo board using hook-and-loop tape or double-sided foam sticky tape. | ||
Latest revision as of 14:11, 15 October 2025
2. Receiver Installation
Carefully press the canopy between your thumb and index finger in order to release the lock on each side to remove the canopy. Connect the S.BUS or DSM2 output cable of your receiver into the respective port on the decoder/servo board. You can secure your receiver to the canopy or into the fuselage behind the decoder/servo board using hook-and-loop tape or double-sided foam sticky tape.