Jump to content

Translations:KAVAN V20 Pro - Quickstart guide/8/en: Difference between revisions

From KAVAN RC Wiki
← Older editNewer edit →
VisualWikitext
FuzzyBot (talk | contribs)
14,395 edits
Importing a new version from external source
FuzzyBot (talk | contribs)
14,395 edits
Importing a new version from external source
Line 1: Line 1:
=== Setting the gimbals ===
=== Setting the gimbals ===
All gimbal setting hexagonal screws are located at the front, so there is no need to disassemble the transmitter to change the mode or feedback.
All gimbal setting hexagonal screws are located at the front, so there is no need to disassemble the transmitter to change the mode or feedback.
[[File:V20Pro gimbals.png|420x420px|right|frameless]]
# Vertical axis
# Horizontal axis
# Horizontal axis resitance
# Horizontal axis travel limiter
# Non-centring vertical axis stiffness
# Self-centring
# Centring vertical axis resistance
# Ratcheting
# Vertical axis travel limiter

Revision as of 11:35, 22 December 2025

Message definition (KAVAN V20 Pro - Quickstart guide)
=== Setting the gimbals ===
[[File:V20Pro gimbals.png|420x420px|right|frameless]]
All gimbal setting hexagonal screws are located at the front, so there is no need to disassemble the transmitter to change the mode or feedback.

Setting the gimbals

All gimbal setting hexagonal screws are located at the front, so there is no need to disassemble the transmitter to change the mode or feedback.

  1. Vertical axis
  2. Horizontal axis
  3. Horizontal axis resitance
  4. Horizontal axis travel limiter
  5. Non-centring vertical axis stiffness
  6. Self-centring
  7. Centring vertical axis resistance
  8. Ratcheting
  9. Vertical axis travel limiter
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_V20_Pro_-_Quickstart_guide/8/en&oldid=47228"