Translations:KAVAN V5 - Quickstart guide/7/en: Difference between revisions

Revision as of 08:09, 5 May 2026

Message definition (KAVAN V5 - Quickstart guide)

=== Gimbal adjustments ===
==== Changing the mode ====
From the Radio Setup menu, change the current mode (mode 2 by default) to the desired mode. Turn off the transmitter, remove the battery case cover and disconnect and remove the battery. Unscrew the 4 screws of the transmitter back cover and remove it (pay extra attention to the attached antennas, which can be disconnected for better handling). To change to the desired mode, loosen the screw holding the self-centring arm mechanism, then screw it into the other gimbal.

Changing the mode

From the Radio Setup menu, change the current mode (mode 2 by default) to the desired mode. Turn off the transmitter, remove the battery case cover and disconnect and remove the battery. Unscrew the 4 screws of the transmitter back cover and remove it (pay extra attention to the attached antennas, which can be disconnected for better handling). To change to the desired mode, loosen the screw holding the self-centring arm mechanism, then screw it into the other gimbal.

Revision as of 11:40, 23 January 2026 view source FuzzyBot (talk \| contribs) 14,538 edits Importing a new version from external source		Revision as of 08:09, 5 May 2026 view source FuzzyBot (talk \| contribs) 14,538 edits Importing a new version from external source Newer edit →
Line 1:		Line 1:
	==== Changing the mode ====		==== Changing the mode ====
	From the ~~gimbal~~ menu, change the current mode (mode 2 by default) to the desired mode. Turn off the transmitter, remove the battery case cover and disconnect and remove the battery. Unscrew the 4 screws of the transmitter back cover and remove it (pay extra attention to the attached antennas, which can be disconnected for better handling). To change to the desired mode, loosen the screw holding the self-centring arm mechanism, then screw it into the other gimbal.		From the Radio Setup menu, change the current mode (mode 2 by default) to the desired mode. Turn off the transmitter, remove the battery case cover and disconnect and remove the battery. Unscrew the 4 screws of the transmitter back cover and remove it (pay extra attention to the attached antennas, which can be disconnected for better handling). To change to the desired mode, loosen the screw holding the self-centring arm mechanism, then screw it into the other gimbal.