Translations:KAVAN V20 - Quickstart guide/5/en: Difference between revisions
No edit summary |
No edit summary |
||
| Line 17: | Line 17: | ||
* Subtrims | * Subtrims | ||
* Reversing the servo operation | * Reversing the servo operation | ||
Setting end points and rate limiting | * Setting end points and rate limiting | ||
Servo speed setting | * Servo speed setting | ||
Resetting data | * Resetting data | ||
Fail-safe emergency rates | * Fail-safe emergency rates | ||
Double deflections | * Double deflections | ||
Rate progression setting along 2 exponential curves or 21-point curves | * Rate progression setting along 2 exponential curves or 21-point curves | ||
Freely programmable mixes | * Freely programmable mixes | ||
Motor shutdown | * Motor shutdown | ||
Safe idle | * Safe idle | ||
Logically linked switches | * Logically linked switches | ||
Intuitive user menu with customizable widgets | * Intuitive user menu with customizable widgets | ||
Servo monitor and servo tester | * Servo monitor and servo tester | ||
Three timers (stopwatch or timer) | * Three timers (stopwatch or timer) | ||
Model run time | * Model run time | ||
Transmitter run time | * Transmitter run time | ||
Indication of preset controller positions when the transmitter is started | * Indication of preset controller positions when the transmitter is started | ||
Adjustable display backlight intensity | * Adjustable display backlight intensity | ||
Calibration of gimbals | * Calibration of gimbals | ||
Sound and vibration warning | * Sound and vibration warning | ||
Range check | * Range check | ||
3 receiver operation mode setting | * 3 receiver operation mode setting | ||
Revision as of 13:45, 8 March 2024
- Colour backlit LCD touchscreen at 4.3" diagonal with 800×480 px resolution
- Up to 20 flight modes for perfect control of your model in all conditions
- Full telemetry with data transfer from a wide range of sensors with the ability to write to an SD card
- Memory for 64 models expandable via SD card
- Voice telemetry output from the speaker or via cable with a 3.5mm Jack connector
- Up to 2 external antennas can be connected
- 6 three-position switches, 2 two-position (1 momentary) switches
- 2 rotary side dials, 2 momentary buttons on the rear
- 6 user-programmable buttons (front)
- 2 programmable mixer rotary knobs
- 4 digital trims
- Programmable slider (tension potentiometer)
- 6-axis gyro sensor
- Precision cross-controllers housed in 10 ball bearings
- Trainer mode via cable or wirelessly via Bluetooth®
- F.BUS socket for programming servos Model names with 15 characters
- Subtrims
- Reversing the servo operation
- Setting end points and rate limiting
- Servo speed setting
- Resetting data
- Fail-safe emergency rates
- Double deflections
- Rate progression setting along 2 exponential curves or 21-point curves
- Freely programmable mixes
- Motor shutdown
- Safe idle
- Logically linked switches
- Intuitive user menu with customizable widgets
- Servo monitor and servo tester
- Three timers (stopwatch or timer)
- Model run time
- Transmitter run time
- Indication of preset controller positions when the transmitter is started
- Adjustable display backlight intensity
- Calibration of gimbals
- Sound and vibration warning
- Range check
- 3 receiver operation mode setting