Translations:KAVAN Beta 1400 Kit - Instruction manual/54/en: Difference between revisions

Latest revision as of 07:01, 9 May 2024

Message definition (KAVAN Beta 1400 Kit - Instruction manual)

* '''A. A radio featuring only one aileron channel''' '''(like the T8FB supplied in the RTF set):''' Connect both two aileron servos to a Y-cable (not supplied in the kit). The aileron Y-cable is to be connected to the aileron channel of your receiver (CH1 in the case of T8FB).
* '''B: A radio featuring 2 independent aileron servo channels:''' Use two 20–30 cm extension cables (not supplied in the kit) to connect aileron servos to your receiver. Typically, CH1 and CH5 or CH6 – it depends on the transmitter and its setting. Please refer to the instruction manual of your radio.

A. A radio featuring only one aileron channel (like the T8FB supplied in the RTF set): Connect both two aileron servos to a Y-cable (not supplied in the kit). The aileron Y-cable is to be connected to the aileron channel of your receiver (CH1 in the case of T8FB).
B: A radio featuring 2 independent aileron servo channels: Use two 20–30 cm extension cables (not supplied in the kit) to connect aileron servos to your receiver. Typically, CH1 and CH5 or CH6 – it depends on the transmitter and its setting. Please refer to the instruction manual of your radio.

Revision as of 13:37, 7 May 2024 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)		Latest revision as of 07:01, 9 May 2024 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)
Line 1:		Line 1:
	* '''A. A radio featuring only one aileron channel''' '''(like the T8FB supplied in the RTF set):''' Connect both two aileron servos to a Y-cable (not supplied in the kit). The aileron Y-cable is to be connected to the aileron channel of your receiver (CH1 in the case of T8FB).		* '''A. A radio featuring only one aileron channel''' '''(like the T8FB supplied in the RTF set):''' Connect both two aileron servos to a Y-cable (not supplied in the kit). The aileron Y-cable is to be connected to the aileron channel of your receiver (CH1 in the case of T8FB).
	* '''B: A radio featuring 2 independent aileron servo channels:''' Use two 20–30 ~~ccm~~ extension cables (not supplied in the kit) to connect aileron servos to your receiver. Typically, CH1 and CH5 or CH6 – it depends on the transmitter and its setting. Please refer to the instruction manual of your radio.		* '''B: A radio featuring 2 independent aileron servo channels:''' Use two 20–30 cm extension cables (not supplied in the kit) to connect aileron servos to your receiver. Typically, CH1 and CH5 or CH6 – it depends on the transmitter and its setting. Please refer to the instruction manual of your radio.