Translations:KAVAN Strike DLG 1498mm - Instruction manual/37/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 1: | Line 1: | ||
=== Tools and Accessories === | === Tools and Accessories === | ||
* Very sharp modeller’s knife (e.g. | * Very sharp modeller’s knife (e.g. [https://www.kavanrc.com/item/kavan-knife-with-cutting-mat-156305 KAV66.770] with No. 11 blades) | ||
* Scissors | * Scissors | ||
* Electric drill with drill bits | * Electric drill with drill bits | ||
Revision as of 13:30, 13 May 2024
Tools and Accessories
- Very sharp modeller’s knife (e.g. KAV66.770 with No. 11 blades)
- Scissors
- Electric drill with drill bits
- Wire cutter
- Long nose pliers
- Screwdrivers
- Razor saw
- Sandpaper No. 100–120, 180–220, 360–400
- Needle files
- Soldering iron and solder
- Clothing pegs
- Modeller’s pins
- Epoxy mixing stick and vessel
- Masking tape, clear sticky tape
- Rubbing alcohol (for cleaning up excessive epoxy)
- Paper tissue or soft cloth (for cleaning up excessive epoxy)
- Straightedge with scale
- Square edge
- Thin clear plastic film (for protecting the building plan)
- Permanent marker
- Modeller’s sealing iron, heat gun (for covering)
- Lightweight balsa filler
- Hot melt glue gun & hot melt glue