Translations:KAVAN V20 - Quickstart guide/5/en

• Colour backlit LCD touchscreen at 4.3" diagonal with 800×480 px resolution
• Up to 20 flight modes for perfect control of your model in all conditions
• Full telemetry with data transfer from a wide range of sensors with the ability to write to an SD card
• Memory for 64 models expandable via SD card
• Voice telemetry output from the speaker or via cable with a 3.5mm Jack connector
• Up to 2 external antennas can be connected
• 6 three-position switches, 2 two-position (1 momentary) switches
• 2 rotary side dials, 2 momentary buttons on the rear
• 6 user-programmable buttons (front)
• 2 programmable mixer rotary knobs
• 4 digital trims
• Programmable slider (tension potentiometer)
• 6-axis gyro sensor
• Precision cross-controllers housed in 10 ball bearings
• Trainer mode via cable or wirelessly via Bluetooth®
• F.BUS socket for programming servos Model names with 15 characters
• Subtrims
• Reversing the servo operation
• Setting end points and rate limiting
• Servo speed setting
• Resetting data
• Fail-safe emergency rates
• Double deflections
• Rate progression setting along 2 exponential curves or 21-point curves
• Freely programmable mixes
• Motor shutdown
• Safe idle
• Logically linked switches
• Intuitive user menu with customizable widgets
• Servo monitor and servo tester
• Three timers (stopwatch or timer)
• Model run time
• Transmitter run time
• Indication of preset controller positions when the transmitter is started
• Adjustable display backlight intensity
• Calibration of gimbals
• Sound and vibration warning
• Range check
• 3 receiver operation mode setting