Jump to content

Translations:KAVAN V20 - Updating the firmware/3/en: Difference between revisions

From KAVAN RC Wiki
Newer edit →
VisualWikitext
FuzzyBot (talk | contribs)
14,395 edits
Importing a new version from external source
 
FuzzyBot (talk | contribs)
14,395 edits
Importing a new version from external source
Line 7: Line 7:
# Pres the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu.
# Pres the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu.
# Wait for the update to finish.
# Wait for the update to finish.
# After the update finishes, press the "EJECT DRIVES" menu.
# After the update finishes, press the "EJECT DRIVES" button.
# Disconnect the V20 from the computer and turn it off.
# Disconnect the V20 from the computer and turn it off.
# Turn it on again and make sure everything works correctly.
# Turn it on again and make sure everything works correctly.

Revision as of 13:04, 5 August 2024

Message definition (KAVAN V20 - Updating the firmware)
==== Procedure ====
# Turn on the V20 in the bootloader mode by pressing and holding the multifunction knob and pressing the power button.
# Start the ETHOS Suite software.
# Connect the V20 to the computer via USB-C. Your V20 will get automatically detected and loaded in the ETHOS Suite.
# Open the Ethos menu in the left bar.
# Choose the preferred interface and audio languages you want to download.
# Press the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu.
# Wait for the update to finish.
# After the update finishes, press the "EJECT DRIVES" button.
# Disconnect the V20 from the computer and turn it off.
# Turn it on again and make sure everything works correctly.

Procedure

  1. Turn on the V20 in the bootloader mode by pressing and holding the multifunction knob and pressing the power button.
  2. Start the ETHOS Suite software.
  3. Connect the V20 to the computer via USB-C. Your V20 will get automatically detected and loaded in the ETHOS Suite.
  4. Open the Ethos menu in the left bar.
  5. Choose the preferred interface and audio languages you want to download.
  6. Pres the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu.
  7. Wait for the update to finish.
  8. After the update finishes, press the "EJECT DRIVES" button.
  9. Disconnect the V20 from the computer and turn it off.
  10. Turn it on again and make sure everything works correctly.
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_V20_-_Updating_the_firmware/3/en&oldid=16113"