Translations:KAVAN V20 - Updating the firmware/3/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 5: | Line 5: | ||
# Open the Ethos menu in the left bar. | # Open the Ethos menu in the left bar. | ||
# Choose the preferred interface and audio languages you want to download. | # Choose the preferred interface and audio languages you want to download. | ||
# | # Press the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu. | ||
# Wait for the update to finish. | # Wait for the update to finish. | ||
# After the update finishes, press the "EJECT DRIVES" button. | # After the update finishes, press the "EJECT DRIVES" button. | ||
# Disconnect the V20 from the computer and turn it off. | # Disconnect the V20 from the computer and turn it off. | ||
# Turn it on again and make sure everything works correctly. | # Turn it on again and make sure everything works correctly. | ||
Latest revision as of 08:32, 13 August 2024
Procedure
- Turn on the V20 in the bootloader mode by pressing and holding the multifunction knob and pressing the power button.
- Start the ETHOS Suite software.
- Connect the V20 to the computer via USB-C. Your V20 will get automatically detected and loaded in the ETHOS Suite.
- Open the Ethos menu in the left bar.
- Choose the preferred interface and audio languages you want to download.
- Press the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu.
- Wait for the update to finish.
- After the update finishes, press the "EJECT DRIVES" button.
- Disconnect the V20 from the computer and turn it off.
- Turn it on again and make sure everything works correctly.