Translations:KAVAN Dingo A3 glider kit 796mm - Instruction manual/10/en: Difference between revisions

Revision as of 09:52, 11 September 2024

Message definition (KAVAN Dingo A3 glider kit 796mm - Instruction manual)

* Lay the wing building plan on the building board and put a sheet of a thin clear plastic film to protect the building plan. If you have got just a small building board, you can carefully cut the building plan into sections – wing section, horizontal tailplane section etc.
* Before you apply the glue, please, always double-check the correct size, shape and alignment of the particular part.
* Balsa and spruce sticks are intentionally supplied oversized in the kit. Pin the stick to the plan overlapping at both ends – you will cut/sand them to the correct length/shape once the assembly of the particular part has been finished.

Lay the wing building plan on the building board and put a sheet of a thin clear plastic film to protect the building plan. If you have got just a small building board, you can carefully cut the building plan into sections – wing section, horizontal tailplane section etc.
Before you apply the glue, please, always double-check the correct size, shape and alignment of the particular part.
Balsa and spruce sticks are intentionally supplied oversized in the kit. Pin the stick to the plan overlapping at both ends – you will cut/sand them to the correct length/shape once the assembly of the particular part has been finished.