Translations:KAVAN Dingo A3 glider kit 796mm - Instruction manual/16/en: Difference between revisions

Revision as of 09:52, 11 September 2024

Message definition (KAVAN Dingo A3 glider kit 796mm - Instruction manual)

==== Horizontal tailplane ====
The horizontal tailplane is to be built directly on the plan protected with a clear plastic film in similar manner as the wing. Pin down the spruce trailing edge '''11''' overlapping on both two ends. Glue the balsa centre plate '''12''' to the trailing edge '''11'''. Glue the spruce leading edge '''13''' to the centre plate and pin it down, overlapping on both two ends. Glue in place the ribs '''14''' made. Start with the outer ribs first. Then proceed towards the centre of the horizontal tailplane.

Horizontal tailplane

The horizontal tailplane is to be built directly on the plan protected with a clear plastic film in similar manner as the wing. Pin down the spruce trailing edge 11 overlapping on both two ends. Glue the balsa centre plate 12 to the trailing edge 11. Glue the spruce leading edge 13 to the centre plate and pin it down, overlapping on both two ends. Glue in place the ribs 14 made. Start with the outer ribs first. Then proceed towards the centre of the horizontal tailplane.