Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/31/en: Difference between revisions

Revision as of 10:00, 11 September 2024

Message definition (KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual)

Now glue the Plywood wing seat plate '''36'''. Keep it centred and square to the side of the fuselage. Glue the beech wing hold-down dowels '''25''' into the fuselage. Mark the position of the holes for the horizontal tailplane hold-down dowels '''34''' and '''35''' (bamboo Ø2.5×25 mm) and glue them in place. Glue the balsa bottom fin '''37''' to the fuselage.

Now glue the Plywood wing seat plate 36. Keep it centred and square to the side of the fuselage. Glue the beech wing hold-down dowels 25 into the fuselage. Mark the position of the holes for the horizontal tailplane hold-down dowels 34 and 35 (bamboo Ø2.5×25 mm) and glue them in place. Glue the balsa bottom fin 37 to the fuselage.