Translations:KAVAN Cumul 100 glider kit 2540mm - Instruction manual/25/en: Difference between revisions

Latest revision as of 13:25, 11 December 2024

Message definition (KAVAN Cumul 100 glider kit 2540mm - Instruction manual)

* Trial fit the parts of the horizontal stabiliser, elevator, fin and rudder – no glue yet! Sand as necessary to obtain the perfect fit. Bevel the leading edge of the rudder and elevator to allow the control surface travel as indicated on the building plan.
* Epoxy the '''T8''' and '''T9''' plywood inserts into the '''T10''' stabiliser centre part. Glue together all the parts using medium cyano or white glue. '''(Fig. 1+2)'''
* Put the tail feathers aside for now. They will be finished after covering, once the tailplane seat is installed to the tail boom.

Trial fit the parts of the horizontal stabiliser, elevator, fin and rudder – no glue yet! Sand as necessary to obtain the perfect fit. Bevel the leading edge of the rudder and elevator to allow the control surface travel as indicated on the building plan.
Epoxy the T8 and T9 plywood inserts into the T10 stabiliser centre part. Glue together all the parts using medium cyano or white glue. (Fig. 1+2)
Put the tail feathers aside for now. They will be finished after covering, once the tailplane seat is installed to the tail boom.