Translations:KAVAN Dara A1 (F1H) glider kit 1200mm - Instruction manual/15/en: Difference between revisions

Latest revision as of 13:26, 11 December 2024

Message definition (KAVAN Dara A1 (F1H) glider kit 1200mm - Instruction manual)

==== Horizontal tailplane ====
The horizontal tailplane is to be built directly on the plan protected with a clear plastic film in similar manner as the wing. Pin down the spruce trailing edge (3×5×405 mm) '''11''' overlapping on both two ends. Glue the balsa centre plate (3 mm – 30×80 mm) '''13''' to the trailing edge '''11'''. Glue the spruce leading edge (3×5×385 mm) '''10''' to the centre plate and pin it down overlapping on both two ends. Cut to size and glue in place the diagonal ribs '''12''' made of 3×5 mm balsa stick. Start with the outer diagonal ribs first; then proceed towards the centre of the horizontal tailplane.

Horizontal tailplane

The horizontal tailplane is to be built directly on the plan protected with a clear plastic film in similar manner as the wing. Pin down the spruce trailing edge (3×5×405 mm) 11 overlapping on both two ends. Glue the balsa centre plate (3 mm – 30×80 mm) 13 to the trailing edge 11. Glue the spruce leading edge (3×5×385 mm) 10 to the centre plate and pin it down overlapping on both two ends. Cut to size and glue in place the diagonal ribs 12 made of 3×5 mm balsa stick. Start with the outer diagonal ribs first; then proceed towards the centre of the horizontal tailplane.