Translations:KAVAN Dara A1 (F1H) glider kit 1200mm - Instruction manual/16/en: Difference between revisions

Latest revision as of 13:26, 11 December 2024

Message definition (KAVAN Dara A1 (F1H) glider kit 1200mm - Instruction manual)

Glue the spruce main spar '''14''' (3×5×200 mm) to the top of the horizontal tailplane framework. Fit and glue the front balsa upper plate '''16''' (3 mm – 30×30 mm) and two rear plates (3 mm – 13.5×45 mm) '''17'''. Align the outer edges of the plates '''17''' to match the bottom plate '''13''' leaving about 2.5 mm slot between them to fit the bamboo dowel '''18''' later. Sand the gussets '''15''' to fit and glue them in place.

Glue the spruce main spar 14 (3×5×200 mm) to the top of the horizontal tailplane framework. Fit and glue the front balsa upper plate 16 (3 mm – 30×30 mm) and two rear plates (3 mm – 13.5×45 mm) 17. Align the outer edges of the plates 17 to match the bottom plate 13 leaving about 2.5 mm slot between them to fit the bamboo dowel 18 later. Sand the gussets 15 to fit and glue them in place.