Translations:KAVAN Dara A1 (F1H) glider kit 1200mm - Instruction manual/38/en: Difference between revisions

Latest revision as of 13:26, 11 December 2024

Message definition (KAVAN Dara A1 (F1H) glider kit 1200mm - Instruction manual)

==== Final assembly, Centre of Gravity (CG) ====
Secure the side towhook '''39''' to the left side of the fuselage using two screws '''38''' – refer to the building plan. The towhook is adjustable. You can move it forward on a windy day or backward on a calm day in order to achieve nice and steady climbing during the hi-start. Use the tip of a pointy modeller's knife to cut slots for the brass tin rudder hinges '''45''' into the fin '''29''' and rudder '''45'''. Cyano the hinges into the rudder and then into the fin leaving a slight gap between the fin and rudder. Tie the wing and horizontal tailplane to the dowels on the fuselage using several loops of the supplied rubber thread.

Final assembly, Centre of Gravity (CG)

Secure the side towhook 39 to the left side of the fuselage using two screws 38 – refer to the building plan. The towhook is adjustable. You can move it forward on a windy day or backward on a calm day in order to achieve nice and steady climbing during the hi-start. Use the tip of a pointy modeller's knife to cut slots for the brass tin rudder hinges 45 into the fin 29 and rudder 45. Cyano the hinges into the rudder and then into the fin leaving a slight gap between the fin and rudder. Tie the wing and horizontal tailplane to the dowels on the fuselage using several loops of the supplied rubber thread.