Translations:KAVAN FunStik 1280mm kit - Instruction manual/30/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 1: | Line 1: | ||
16. Cut the notches for aileron hinges into the trailing edge and aileron. Insert the hinges into the trailing edge and aileron - do not glue yet. Be sure the aileron moves freely in the required range up and down. The hinges are to be glued after the wing and aileron | 16. Cut the notches for aileron hinges into the trailing edge and aileron. Insert the hinges into the trailing edge and aileron - do not glue yet. Be sure the aileron moves freely in the required range up and down. The hinges are to be glued after the wing and aileron have been covered. | ||
Latest revision as of 09:25, 8 January 2025
16. Cut the notches for aileron hinges into the trailing edge and aileron. Insert the hinges into the trailing edge and aileron - do not glue yet. Be sure the aileron moves freely in the required range up and down. The hinges are to be glued after the wing and aileron have been covered.