Translations:KAVAN Savage Mini - Instruction manual/19/en: Difference between revisions

Latest revision as of 13:25, 8 January 2025

Message definition (KAVAN Savage Mini - Instruction manual)

* Referring to the instruction manual of your radio carefully hook up the onboard electronics. Correct linkage length - please refer to assembly steps 24, 50 and 60.
* Once everything has been correctly connected, turn on your transmitter and plug in the flight pack. Check the neutral positions and throws of all control surfaces. If you need to make the control surface throws smaller, simply move the pushrod closer to the centre on the servo arm or move it far from the control surface on the control horn. And vice versa.

Referring to the instruction manual of your radio carefully hook up the onboard electronics. Correct linkage length - please refer to assembly steps 24, 50 and 60.
Once everything has been correctly connected, turn on your transmitter and plug in the flight pack. Check the neutral positions and throws of all control surfaces. If you need to make the control surface throws smaller, simply move the pushrod closer to the centre on the servo arm or move it far from the control surface on the control horn. And vice versa.

Revision as of 07:51, 17 May 2024 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)		Latest revision as of 13:25, 8 January 2025 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)
Line 1:		Line 1:
	* Referring to the instruction manual of your radio carefully hook up the onboard electronics. Correct linkage length - refer to assembly steps 24, 50 and 60 ~~please~~.		* Referring to the instruction manual of your radio carefully hook up the onboard electronics. Correct linkage length - please refer to assembly steps 24, 50 and 60.
	* Once everything has been correctly connected, turn on your transmitter and plug in the flight pack. Check the neutral positions and throws of all control surfaces. If you ~~needed~~ to make the control surface throws smaller, simply move the pushrod closer to the centre on the servo arm or move it far from the control surface on the control horn. And vice versa.		* Once everything has been correctly connected, turn on your transmitter and plug in the flight pack. Check the neutral positions and throws of all control surfaces. If you need to make the control surface throws smaller, simply move the pushrod closer to the centre on the servo arm or move it far from the control surface on the control horn. And vice versa.