Jump to content

Translations:KAVAN AP09A - Instruction Manual/80/en: Difference between revisions

From KAVAN RC Wiki
Newer edit →
VisualWikitext
FuzzyBot (talk | contribs)
14,395 edits
Importing a new version from external source
 
FuzzyBot (talk | contribs)
14,395 edits
Importing a new version from external source
Line 1: Line 1:
2. The high-end needle should be set rich, 200 to 300 rpm lower than „peak“ rpm. To facilitate carburettor adjustments, you may wish to use a digital tachometer.
2. After the engine has warmed up, give full throttle and slowly close the needle valve until the engine reaches maximum speed. Then slowly open the needle valve, until the speed drops audibly. If you have a tachometer, this is a drop of 200–300 rpm.

Revision as of 07:48, 7 August 2025

2. After the engine has warmed up, give full throttle and slowly close the needle valve until the engine reaches maximum speed. Then slowly open the needle valve, until the speed drops audibly. If you have a tachometer, this is a drop of 200–300 rpm.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_AP09A_-_Instruction_Manual/80/en&oldid=35112"