Translations:KAVAN Vinx free flight glider 600mm kit - Instruction manual/81/en: Difference between revisions

Revision as of 13:30, 27 August 2025

Message definition (KAVAN Vinx free flight glider 600mm kit - Instruction manual)

77. Like in steps 52./53., join the wing centre sections and wing panels - now using a clear sticky tape. Apply 5min epoxy to the ribs and glue together; double check the correct dihedral (refer to Fig. 53) before the glue sets. Remove any excess glue with a paper towel soaked with rubbing alcohol immediately.

Revision as of 12:58, 27 August 2025 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)		Revision as of 13:30, 27 August 2025 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source) Newer edit →
Line 1:		Line 1:
	77. Like in steps 52./53., join the wing centre sections and wing panels - now using a clear sticky tape. Apply 5min epoxy to the ribs and glue together; double check the correct dihedral (refer to Fig. 53) before the glue sets. Remove any excess glue with a paper towel soaked with rubbing alcohol immediately. 78. Like in step 54., join the wing halves using a clear sticky tape. Apply 5min epoxy to the ribs and glue together; double check the correct dihedral (refer to Fig. 54) before the glue sets. Remove any excess glue with a paper towel soaked with rubbing alcohol immediately.		77. Like in steps 52./53., join the wing centre sections and wing panels - now using a clear sticky tape. Apply 5min epoxy to the ribs and glue together; double check the correct dihedral (refer to Fig. 53) before the glue sets. Remove any excess glue with a paper towel soaked with rubbing alcohol immediately.