Translations:KAVAN V20 + ETHOS™ - User manual/373/en: Difference between revisions

From KAVAN RC Wiki
VisualWikitext
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
Běžná aplikace je u klapek, kde je dráha serva posunuta v jednom směru, aby se maximalizovala dráha klapek směrem dolů. Výsledkem je, že klapky jsou v neutrální poloze serva v polovině dráhy dolů. mix Offset pak lze použít k tomu, aby se klapky dostaly do polohy "neutrální polohy", když je výstup mixu klapek nulový.
The Offset mix is used to add a fixed value to the mixer when an offset is required. A common application is for flaps, where the servo horn is offset in one direction in order to maximize the downward flap travel. This results in the flaps being in a half way down position at servo neutral. The Offset mix can then be used to bring the flaps up to the ‘surface neutral’ position when the flaps mixer output is zero.

Latest revision as of 11:47, 18 March 2024

Message definition (KAVAN V20 + ETHOS™ - User manual)
The Offset mix is used to add a fixed value to the mixer when an offset is required. A common application is for flaps, where the servo horn is offset in one direction in order to maximize the downward flap travel. This results in the flaps being in a half way down position at servo neutral. The Offset mix can then be used to bring the flaps up to the ‘surface neutral’ position when the flaps mixer output is zero.

The Offset mix is used to add a fixed value to the mixer when an offset is required. A common application is for flaps, where the servo horn is offset in one direction in order to maximize the downward flap travel. This results in the flaps being in a half way down position at servo neutral. The Offset mix can then be used to bring the flaps up to the ‘surface neutral’ position when the flaps mixer output is zero.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_V20_%2B_ETHOS™_-_User_manual/373/en&oldid=3843"