Translations:KAVAN SLING Mini 616mm - Instruction manual/50/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 1: | Line 1: | ||
==== 2. Receiver Installation ==== | ==== 2. Receiver Installation ==== | ||
Carefully press the canopy between your thumb and index finger in order to release the lock on each side to remove the canopy. Connect the S.BUS or DSM2 output cable of your receiver into the respective port on the decoder/servo board. You can secure your receiver to the canopy or into the fuselage behind the decoder/servo board using hook-and-loop tape or double sided foam sticky tape. | Carefully press the canopy between your thumb and index finger in order to release the lock on each side to remove the canopy. Connect the S.BUS or DSM2 output cable of your receiver into the respective port on the decoder/servo board. You can secure your receiver to the canopy or into the fuselage behind the decoder/servo board using hook-and-loop tape or double-sided foam sticky tape. | ||
Revision as of 10:09, 18 September 2025
2. Receiver Installation
Carefully press the canopy between your thumb and index finger in order to release the lock on each side to remove the canopy. Connect the S.BUS or DSM2 output cable of your receiver into the respective port on the decoder/servo board. You can secure your receiver to the canopy or into the fuselage behind the decoder/servo board using hook-and-loop tape or double-sided foam sticky tape.