Translations:KAVAN SLING Mini 616mm - Instruction manual/66/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 1: | Line 1: | ||
The travel volumes of the control surfaces are influenced by the setting of your transmitter (if it features EPA/ATV function) and the position of the push rods on the respective servo arms and elevator/rudder horns. Fitting the push rods closer to the control surface increases the travel volume, whilst attaching the push rod to the outer hole decreases the travel volume. Fitting the push rods closer to the servo shaft decreases the travel volume, whilst attaching the push rod to the outer hole increases the travel volume. Using your transmitter EPA/ATV or | The travel volumes of the control surfaces are influenced by the setting of your transmitter (if it features EPA/ATV function) and the position of the push rods on the respective servo arms and elevator/rudder horns. Fitting the push rods closer to the control surface increases the travel volume, whilst attaching the push rod to the outer hole decreases the travel volume. Fitting the push rods closer to the servo shaft decreases the travel volume, whilst attaching the push rod to the outer hole increases the travel volume. Using your transmitter EPA/ATV or mechanically on your model, set the recommended default travel rates. | ||
Latest revision as of 10:09, 18 September 2025
The travel volumes of the control surfaces are influenced by the setting of your transmitter (if it features EPA/ATV function) and the position of the push rods on the respective servo arms and elevator/rudder horns. Fitting the push rods closer to the control surface increases the travel volume, whilst attaching the push rod to the outer hole decreases the travel volume. Fitting the push rods closer to the servo shaft decreases the travel volume, whilst attaching the push rod to the outer hole increases the travel volume. Using your transmitter EPA/ATV or mechanically on your model, set the recommended default travel rates.