Translations:KAVAN SLING Mini 616mm - Instruction manual/79/en: Difference between revisions

Revision as of 10:09, 18 September 2025

Message definition (KAVAN SLING Mini 616mm - Instruction manual)

[[File:Sling MINI - Launch.png|right|frameless|420x420px|Launch into the wind .Wing and fuselage level or slightly down.]]
==== Step 1: Hand launch and initial trimming ====
* The model must be launched into the wind every time. Throw grass into the air to observe the wind direction.
* Turn on your transmitter.
* Connect and put the receiver battery into the nose and secure the canopy.
* Hold your model with the wings and fuselage level (refer to the drawing) – it is better to ask a friend to launch your model than to do everything by yourself – you can then concentrate on the controls. Launch your model with a gentle push straight and level. You will feel the point at which the model is trying to fly naturally. Do not give it too strong a push. Do not throw your model with nose up, or greater than 10 degrees down. The model must have a certain minimum speed from the very start to stay airborne. It is not enough to just place your model in the air.
* If everything is OK, the Sling MINI will glide gently to the ground without the need for a control input. If Sling MINI quickly loses altitude, pull the elevator stick very slightly towards you (just a little!) to achieve a steady shallow glide. If Sling MINI pitches her nose strongly, immediately push the elevator stick to prevent the stall; to achieve a steady shallow glide.

Step 1: Hand launch and initial trimming

• The model must be launched into the wind every time. Throw grass into the air to observe the wind direction.

Revision as of 09:23, 9 September 2025 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)		Revision as of 10:09, 18 September 2025 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source) Newer edit →
Line 1:		Line 1:
	==== Step 1: Hand launch and initial trimming ====		==== Step 1: Hand launch and initial trimming ====
	• The model must be launched into wind every time. Throw grass into the air to observe the wind direction.		• The model must be launched into the wind every time. Throw grass into the air to observe the wind direction.