Translations:KAVAN SLING Mini 616mm - Instruction manual/92/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 1: | Line 1: | ||
===== Final Setup ===== | ===== Final Setup ===== | ||
Now is the time for the final setup. Fly your SLING mini straight into wind; leave the controls in the neutral position. If the model turns in one direction apply the rudder trim in the opposite direction until SLING mini flies straight. Your model must settle into a gentle glide, not too fast so that it plummets to the ground, and not so slow that the controls feel “soggy” and the model is on the edge of the stall. Apply the elevator trim in | Now is the time for the final setup. Fly your SLING mini straight into the wind; leave the controls in the neutral position. If the model turns in one direction, apply the rudder trim in the opposite direction until SLING mini flies straight. Your model must settle into a gentle glide, not too fast so that it plummets to the ground, and not so slow that the controls feel “soggy” and the model is on the edge of the stall. Apply the elevator trim in a way to solve any problem. | ||
Revision as of 10:09, 18 September 2025
Final Setup
Now is the time for the final setup. Fly your SLING mini straight into the wind; leave the controls in the neutral position. If the model turns in one direction, apply the rudder trim in the opposite direction until SLING mini flies straight. Your model must settle into a gentle glide, not too fast so that it plummets to the ground, and not so slow that the controls feel “soggy” and the model is on the edge of the stall. Apply the elevator trim in a way to solve any problem.