Translations:KAVAN FT160AR - Instruction Manual/106/en: Difference between revisions
Importing a new version from external source |
m FuzzyBot moved page Translations:Kavan FT160AR - Instruction Manual/106/en to Translations:KAVAN FT160AR - Instruction Manual/106/en without leaving a redirect: Part of translatable page "Kavan FT160AR - Instruction Manual" |
||
(No difference)
| |||
Latest revision as of 11:25, 15 October 2025
• Install the engine and fit the propeller that you propose to use for flying your model. For example, If you use the propeller indicated in the „Propeller“ chapter, start the engine and run it for about 10 seconds with the needle-valve set for 6,000/6,500 r.p.m., then open the needle-valve to reduce speed to approximately 4,000 r.p.m. and run for 20 seconds at this cooler setting. Keep the throttle fully open, using only the needle-valve to reduce speed.