Translations:KAVAN FT160AR - Instruction Manual/123/en: Difference between revisions

Revision as of 10:26, 15 October 2025

Message definition (KAVAN FT160AR - Instruction Manual)

If the gap is found to be too small or too large, reset the valve clearance as follows:
# Carefully loose the locknut on one rocker arm with wrench.
# Turn adjusting screw approx. 1/2 turn counter clockwise to open gap.
# Insert 0.04 mm feeler gauge between valve stem and rocker arm, and gently turn adjusting screw clockwise with a screwdriver until it stops.
# Re-tighten the locknut while holding the adjusting screw with a screwdriver.
# Remove 0.04 feeler gauge, rotate prop through exactly two turns and re-check gap. If the valve clearance is correctly adjusted, check other valve and adjust if necessary. Then replace rocker cover.
# Check the other cylinder and adjust, if necessary, in the same way

If the gap is found to be too small or too large, reset the valve clearance as follows: