Translations:KAVAN Alpha 1500mm - Instruction manual/173/sk: Difference between revisions

Latest revision as of 12:58, 15 October 2025

Message definition (KAVAN Alpha 1500mm - Instruction manual)

=== Checking the current set-up ===
1. Assure that the transmitter is turned on (both the LEDs are on with the T8FB), place all the trims in their neutral positions and set the throttle stick into the lowest position. Connect the flight pack to the ESC – the red LED on the receiver must glow. If it blinks or does not glow at all, the receiver and transmitter require establishing their link by the binding procedure – refer to page 6 in this manual.

Kontrola nastavenia modela

1. Uistite, že je ovládač plynu na vysielači úplne dole, vysielač je zapnutý a svietia obe indikačná LED na jeho prednom paneli. Všetky trimy nastavte do stredovej polohy. K regulátoru otáčok v modeli pripojte pohonný akumulátor - červená LED dióda na prijímači musí svietiť. Ak nesvieti alebo bliká, je potrebné vykonať tzv párovanie vysielača a prijímača - pozri doplnok.