Translations:KAVAN FT160AR - Instruction Manual/117/en: Difference between revisions
m (FuzzyBot moved page Translations:Kavan FT160AR - Instruction Manual/117/en to Translations:KAVAN FT160AR - Instruction Manual/117/en without leaving a redirect: Part of translatable page "Kavan FT160AR - Instruction Manual") |
(Importing a new version from external source) |
||
| Line 1: | Line 1: | ||
=== | === Lubrication === | ||
All the parts of your engine are automatically lubricated by the oil content of the fuel mixture. The crankcase breather hole is in the bottom of the timing case and is fitted with a brass nipple. Fit a length of silicone tubing of approx. 2.5-3 mm I.D. to this nipple to conduct the small amount of oil that escapes through the breather away from the model. Do not block or obstruct in any way the breather nipple. | All the parts of your engine are automatically lubricated by the oil content of the fuel mixture. The crankcase breather hole is in the bottom of the timing case and is fitted with a brass nipple. Fit a length of silicone tubing of approx. 2.5-3 mm I.D. to this nipple to conduct the small amount of oil that escapes through the breather away from the model. Do not block or obstruct in any way the breather nipple. | ||
Latest revision as of 10:29, 23 October 2025
Lubrication
All the parts of your engine are automatically lubricated by the oil content of the fuel mixture. The crankcase breather hole is in the bottom of the timing case and is fitted with a brass nipple. Fit a length of silicone tubing of approx. 2.5-3 mm I.D. to this nipple to conduct the small amount of oil that escapes through the breather away from the model. Do not block or obstruct in any way the breather nipple.