Translations:KAVAN V10 - Quickstart guide/4/en: Difference between revisions
Importing a new version from external source |
Importing a new version from external source |
||
| Line 11: | Line 11: | ||
* 2 rotary side dials | * 2 rotary side dials | ||
* 4 digital trims | * 4 digital trims | ||
* Precision | * Precision Hall sensor gimbals with all-CNC aluminium stick caps | ||
* Trainer mode via cable (3.5mm port) | * Trainer mode via cable (3.5mm port) | ||
* Model names with 7 characters | * Model names with 7 characters | ||
Latest revision as of 09:23, 6 May 2026
Features
- Up to 8 flight modes for perfect control of your model in all conditions
- Full telemetry with data transfer from a wide range of sensors
- Memory for up to 32 models
- 2 short three-position switches
- 2 long three-position switches
- 2 long two-position switches (1 momentary)
- 2 rear momentary buttons
- 1 multifunctional rotary knob
- 2 rotary knobs
- 2 rotary side dials
- 4 digital trims
- Precision Hall sensor gimbals with all-CNC aluminium stick caps
- Trainer mode via cable (3.5mm port)
- Model names with 7 characters
- Reversing the servo operation
- Setting end points
- Resetting data
- Fail-safe emergency rates
- Rate progression setting along exponential or 17-point curves
- Freely programmable mixes
- Logically linked switches
- Simple and intuitive user interface
- Servo monitor
- 2 timers (stopwatch or timer)
- Adjustable display backlight intensity
- Calibration of gimbals
- Beeper alerts
- Range check
- 3 receiver operation mode setting (Redundancy)