Translations:KAVAN V20 - Quickstart guide/5/en: Difference between revisions
(založena nová stránka s textem „Colour backlit LCD touchscreen at 4.3" diagonal with 800×480 px resolution Up to 20 flight modes for perfect control of your model in all conditions Full telemetry with data transfer from a wide range of sensors with the ability to write to an SD card Memory for 64 models expandable via SD card Voice telemetry output from the speaker or via cable with a 3.5mm Jack connector Up to 2 external antennas can be connected 6 three-position switches, 2 two-p…“) |
No edit summary |
||
| Line 1: | Line 1: | ||
Colour backlit LCD touchscreen at 4.3" diagonal with 800×480 px resolution | * Colour backlit LCD touchscreen at 4.3" diagonal with 800×480 px resolution | ||
Up to 20 flight modes for perfect control of your model in all conditions | * Up to 20 flight modes for perfect control of your model in all conditions | ||
Full telemetry with data transfer from a wide range of sensors with the ability to write to an SD card | * Full telemetry with data transfer from a wide range of sensors with the ability to write to an SD card | ||
Memory for 64 models expandable via SD card | * Memory for 64 models expandable via SD card | ||
Voice telemetry output from the speaker or via cable with a 3.5mm Jack connector | * Voice telemetry output from the speaker or via cable with a 3.5mm Jack connector | ||
Up to 2 external antennas can be connected | * Up to 2 external antennas can be connected | ||
6 three-position switches, 2 two-position (1 momentary) switches | * 6 three-position switches, 2 two-position (1 momentary) switches | ||
2 rotary side dials, 2 momentary buttons on the rear | * 2 rotary side dials, 2 momentary buttons on the rear | ||
6 user-programmable buttons (front) | * 6 user-programmable buttons (front) | ||
2 programmable mixer rotary knobs | * 2 programmable mixer rotary knobs | ||
4 digital trims | * 4 digital trims | ||
Programmable slider (tension potentiometer) | * Programmable slider (tension potentiometer) | ||
6-axis gyro sensor | * 6-axis gyro sensor | ||
Precision cross-controllers housed in 10 ball bearings | * Precision cross-controllers housed in 10 ball bearings | ||
Trainer mode via cable or wirelessly via Bluetooth® | * Trainer mode via cable or wirelessly via Bluetooth® | ||
F.BUS socket for programming servos Model names with 15 characters | * F.BUS socket for programming servos Model names with 15 characters | ||
Subtrims | * Subtrims | ||
Reversing the servo operation | * Reversing the servo operation | ||
Setting end points and rate limiting | Setting end points and rate limiting | ||
Servo speed setting | Servo speed setting | ||
Revision as of 13:45, 8 March 2024
- Colour backlit LCD touchscreen at 4.3" diagonal with 800×480 px resolution
- Up to 20 flight modes for perfect control of your model in all conditions
- Full telemetry with data transfer from a wide range of sensors with the ability to write to an SD card
- Memory for 64 models expandable via SD card
- Voice telemetry output from the speaker or via cable with a 3.5mm Jack connector
- Up to 2 external antennas can be connected
- 6 three-position switches, 2 two-position (1 momentary) switches
- 2 rotary side dials, 2 momentary buttons on the rear
- 6 user-programmable buttons (front)
- 2 programmable mixer rotary knobs
- 4 digital trims
- Programmable slider (tension potentiometer)
- 6-axis gyro sensor
- Precision cross-controllers housed in 10 ball bearings
- Trainer mode via cable or wirelessly via Bluetooth®
- F.BUS socket for programming servos Model names with 15 characters
- Subtrims
- Reversing the servo operation
Setting end points and rate limiting Servo speed setting Resetting data Fail-safe emergency rates Double deflections Rate progression setting along 2 exponential curves or 21-point curves Freely programmable mixes Motor shutdown Safe idle Logically linked switches Intuitive user menu with customizable widgets Servo monitor and servo tester Three timers (stopwatch or timer) Model run time Transmitter run time Indication of preset controller positions when the transmitter is started Adjustable display backlight intensity Calibration of gimbals Sound and vibration warning Range check 3 receiver operation mode setting