Jump to content

Translations:KAVAN AP09A - Instruction Manual/44/en

From KAVAN RC Wiki
Revision as of 14:44, 28 January 2026 by FuzzyBot (talk | contribs) (FuzzyBot moved page Translations:KAVAN AP09 - Instruction Manual/44/en to Translations:KAVAN AP09A - Instruction Manual/44/en without leaving a redirect: Part of translatable page "KAVAN AP09 - Instruction Manual")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

8. Propeller Installation

The propeller fits onto the engine‘s crankshaft. If it does not fit, use a propeller reamer, tapered reamer to open the hole slightly. Do NOT oversize the hole. Once the propeller has been positioned on the shaft, use the spinner nut to retain the propeller. To tighten the nut, slide a screwdriver or other device through the hole in the end of the nut.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_AP09A_-_Instruction_Manual/44/en&oldid=47845"