Translations:KAVAN R6L - User manual/20/en
Note:
The gyroscope of the device (6 surfaces) must be calibrated before mounting it into the model. Place the device on a flat surface and follow the steps to finish the calibration.
Once the calibration of all the device surfaces is complete, the accelerator telemetry values of each axis (AccX, AccY and AccZ) are about 1.000 g while the device is placed in the corresponding direction. The deviation is ±0.1.
The gyroscope of the device (6 surfaces) must be calibrated before mounting it into the model. Place the device on a flat surface and follow the steps to finish the calibration.
Once the calibration of all the device surfaces is complete, the accelerator telemetry values of each axis (AccX, AccY and AccZ) are about 1.000 g while the device is placed in the corresponding direction. The deviation is ±0.1.