Jump to content

Translations:KAVAN AP09A - Instruction Manual/64/en

From KAVAN RC Wiki
Revision as of 11:23, 6 August 2025 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

8. After 20 to 40 seconds, disconnect the battery to the glow plug. Then slowly turn the needle valve to „lean“ the mixture and increase rpms. Over adjusting or abrupt adjustments will „over lean“ the engine and cause it to stall and possibly to damage the engine. If this is the first or an early run for the engine, refer to the Break-In section of the manual before continuing.