Jump to content

Translations:KAVAN AP09A - Instruction Manual/43/en

From KAVAN RC Wiki
Revision as of 11:23, 6 August 2025 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

7. Carburettor Installation

The carburettor is held in position by a cinch bolt and nut. Slide the carburettor into the engine case. Lightly press against the carburettor to slightly compress the O-ring around the base of the carburettor. Tighten the nut on the cinch bolt to hold the carburettor in place. Do NOT over tighten the nut, as this will crush the carburettor base.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_AP09A_-_Instruction_Manual/43/en&oldid=34737"