FrSky MC30R Křížové ovladače - Průvodce nastavením
Úvod
Najít nejlepší nastavení RC vysílače je nyní ještě jednodušší a rychlejší. KAVAN V20 Pro, vyráběný společností FrSky, je vybaven novými revolučními kniply MC30R, které jsou plně nastavitelné zepředu. Jsou navrženy pro RC letadla, perfektní pro vrtulníky a kompatibilní se širokou škálou dalších RC modelů, jako jsou drony, auta nebo lodě. Ve spojení s operačním systémem ETHOS pro dálkové ovládání a širokou nabídkou kompatibilních přijímačů dosáhneš perfektního nastavení svého rádia během okamžiku.
Gimbal description
- Vertical axis
- Horizontal axis
- Horizontal axis resistance
- Horizontal axis travel limiter
- Non-centring vertical axis stiffness
- Self-centring
- Centring vertical axis resistance
- Ratcheting
- Vertical axis travel limiter
1. Vertical axis
Controls the pitch axis (elevator) or speed (throttle).
2. Horizontal axis
Controls the roll axis (ailerons) or yaw axis (rudder).
3. Horizontal axis RESISTANCE
Adjusts the tension of the horizontal axis self-centring spring. Loosening the screw reduces the centring spring force, therefore slowing down the horizontal axis's return to the neutral position.
4. Horizontal axis travel limiter
Adjusts the mechanical travel range limiter of the gimbal's whole horizontal axis. By tightening the screw, the maximum deflection from the centre position can be set between 22.5° and 30°.
5. Non-centring vertical axis stiffness
Adjusts the overall stiffness of the vertical axis movement of the gimbal.
6. Self-centring
Adjusts the self-centring mode of the gimbal. Tightening the screw disables self-centring (the „throttle stick“ does not return to the neutral position). Loosening the screw enables self-centring.
7. Centring vertical axis resistance
Adjusts the self-centring spring tension of the vertical axis when self-centring is enabled. Loosening the screw reduces the centring spring force and therefore slows down the vertical axis's return to the neutral position.
8. Ratcheting
Adjusts the ratcheting effect of the gimbal's vertical axis. When fully tightened, the ratcheting effect is at its maximum. When fully loosened, the vertical axis movement is smooth.
9. Vertical axis travel limiter
Adjusts the mechanical travel range limiter of the gimbal's whole vertical axis. By tightening the screw, the maximum deflection from the centre position can be set between 22.5° and 30°.
Tutorial
How to change the mode on the KAVAN V20 Pro RC transmitter? It's a matter of just a few seconds. A couple of screwdriver turns, an even quicker setup directly in the transmitter, and that's it. Watch the video tutorial to see how to do it.