Translations:KAVAN V20 - Quickstart guide/5/en

Colour backlit LCD touchscreen at 4.3" diagonal with 800×480 px resolution Up to 20 flight modes for perfect control of your model in all conditions Full telemetry with data transfer from a wide range of sensors with the ability to write to an SD card Memory for 64 models expandable via SD card Voice telemetry output from the speaker or via cable with a 3.5mm Jack connector Up to 2 external antennas can be connected 6 three-position switches, 2 two-position (1 momentary) switches 2 rotary side dials, 2 momentary buttons on the rear 6 user-programmable buttons (front) 2 programmable mixer rotary knobs 4 digital trims Programmable slider (tension potentiometer) 6-axis gyro sensor Precision cross-controllers housed in 10 ball bearings Trainer mode via cable or wirelessly via Bluetooth® F.BUS socket for programming servos Model names with 15 characters Subtrims Reversing the servo operation Setting end points and rate limiting Servo speed setting Resetting data Fail-safe emergency rates Double deflections Rate progression setting along 2 exponential curves or 21-point curves Freely programmable mixes Motor shutdown Safe idle Logically linked switches Intuitive user menu with customizable widgets Servo monitor and servo tester Three timers (stopwatch or timer) Model run time Transmitter run time Indication of preset controller positions when the transmitter is started Adjustable display backlight intensity Calibration of gimbals Sound and vibration warning Range check 3 receiver operation mode setting