All translations
Enter a message name below to show all available translations.
Found 3 translations.
| Name | Current message text |
|---|---|
| h čeština (cs) | === Identifikace motoru === Některé značky motorů obsahují integrované teplotní čidlo kompatibilní s KAVAN SMART PRO regulátory. Tento senzor (T125-ID) lze použít i jako samostatný telemetrický senzor s podporou telemetrie Duplex/Hott/S.Bus2. Navíc jej lze připojit přímo ke vstupnímu portu „IN-A“ na regulátoru (viz obrázek výše). Od tohoto okamžiku bude regulátor KAVAN Smart PRO znát základní parametry motoru (minimální akceleraci, doporučené časování, převodový poměr, počet pólů…) a také aktuální teplotu motoru. Některé parametry se přenastaví automaticky (převodový poměr, počet pólů), ostatní položky nastavení se aplikují, jakmile resetujete regulátor do továrního nastavení. Senzor identifikace motoru se připojuje do portu '''IN-A''' na regulátoru. |
| h Deutsch (de) | === Motoridentifikation === Einige Motorenmarken verfügen über einen integrierten Temperatursensor, der mit Reglern KAVAN SMART PRO kompatibel ist. Dieser Sensor (T125-ID) kann auch als eigenständiger Telemetriesensor mit Duplex/Hott/S.Bus2 Telemetrieunterstützung verwendet werden. Außerdem kann er direkt an den "IN-A" Eingangsport des Reglers angeschlossen werden (siehe Abbildung oben). Ab diesem Zeitpunkt kennt der Regler KAVAN Smart PRO die grundlegenden Motorparameter (Mindestbeschleunigung, empfohlenes Timing, Übersetzungsverhältnis, Anzahl der Pole...) und auch die aktuelle Motortemperatur. Einige Parameter werden automatisch eingestellt (Übersetzungsverhältnis, Anzahl der Pole), andere Einstellungsposten werden übernommen, sobald Sie den Regler auf die Werkseinstellungen zurücksetzen. Der Motoridentifikationssensor wird an den '''IN-A''' Port des Reglers angeschlossen. |
| h English (en) | === Motor identification === Some brands of motors include an integrated temperature sensor compatible with KAVAN SMART PRO controllers. This sensor (T125-ID) can also be used as a stand-alone telemetry sensor with Duplex/Hott/S.Bus2/Fport telemetry support. In addition, it can be connected directly to the "IN-A" input port on the controller (see picture above). From this point on, the KAVAN Smart PRO controller will know the basic motor parameters (minimum acceleration, recommended timing, gear ratio, number of poles...) and also the current motor temperature. Some parameters will be reset automatically (gear ratio, number of poles), and other setting items will be applied once you reset the controller to factory settings. The motor identification sensor is connected to the '''IN-A''' port on the controller. |