Translations:KAVAN Smart PRO Opto ESCs - Instruction manual/147/en

From KAVAN RC Wiki
Revision as of 09:13, 14 August 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Available status codes:

  • Low Voltage (UL): the battery voltage has fallen below the threshold value specified in the Battery Protection menu, and the controller has either reduced the maximum power or shut down the motor completely.
  • High voltage (UH): If you use a soft battery or mains power supply, the voltage may rise above the initial level during braking. In this case, an alarm is triggered and all braking functions are disabled.
  • High current (IH): the current is higher than the maximum peak current defined in the product specification (e.g. 120 A for KAVAN SMART PRO 80, 200 A for KAVAN SMART PRO 130).
  • High temperature (T100, T110, T120): the temperature is above a safe level. The numeric value indicates the maximum temperature detected and the safety protocol that has been activated.
  • Commutation (COM) error: a synchronisation error was detected while the motor was running. This usually occurs when the motor stops suddenly or in the case of very fast acceleration on some specific power units. This error may indicate a serious problem in the motor-controller installation.
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_Smart_PRO_Opto_ESCs_-_Instruction_manual/147/en&oldid=16472"