Translations:KAVAN Smart PRO Opto ESCs - Instruction manual/186/en

• We assume that the throttle and telemetry cables are correctly connected and the transmitter is switched on. Now set the remote control to the "Full throttle" position.
• Switch on the controller either by connecting the propulsion or by switching on the external switch.
• The motor will start, indicating full-throttle pulse detection. After 3 seconds, another beep will signal entry into the programming menu.
• You can now fully turn the throttle down. From the transmitter's main screen, scroll to the right and locate the TextGen menu. If the text menu is activated, the motor will never start revving. To get the motor running normally again, exit the TextGen menu by selecting "Exit" on the main page.
• The menu navigation is provided by the transmitter sticks - the elevator stick moves the cursor up/down and the aileron stick changes the selected value.
• Configuration changes are saved immediately after any value is modified.