Translations:KAVAN Pro ESCs - Instruction manual/13/en

1. Turn on the transmitter and move the throttle stick to the top position.
2. Connect a battery to the ESC; the motor will emit "123" to indicate the ESC is normally powered on.
3. Then the motor will emit two short beeps to indicate the maximum throttle endpoint is accepted.
4. Move the throttle stick to the bottom position within 5 seconds after the two short beeps, the minimum throttle position will be accepted 1 second later.
5. The motor emits "Number" beeps to indicate the number of LiPo cells you plugged in.
6. The motor emits a long beep to indicate the calibration is complete.