Jump to content

Translations:KAVAN Smart PRO T75 Dual battery switch with telemetry expander - Instruction manual/20/en

From KAVAN RC Wiki
Revision as of 10:42, 31 October 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Touch switch behaviour

  • Place the touch button anywhere on your model on a surface made of nonconductive material. You can place the touch button also inside the fuselage with a maximum thickness of up to 3 mm.
  • Make the status LED visible from outside the fuselage and put the “touch” sticker on top of the touch surface.
  • Connect the receiver battery to the battery switch and briefly touch the button. The status LED should blink once. If not, please increase the touch sensitivity parameter in the configuration.
  • Touch and hold the button for about 2 seconds. After the initial blink, the LED will start blinking again. At this moment, release the button. The main output will be activated:
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_Smart_PRO_T75_Dual_battery_switch_with_telemetry_expander_-_Instruction_manual/20/en&oldid=25418"