Translations:KAVAN Long sticks - Installation manual/11/cs

Nastavení přepínačů

1. Zapněte vysílač.
2. Navigate to System → Hardware → Pots/Sliders settings.
3. Enable the External pot 1 (Ext1 - left gimbal) or External pot 2 (Ext2 - right gimbal).
4. Navigate to Switches settings.
5. Select the SK (left gimbal) or SL (right gimbal) switch and set it to Momentary.
6. Navigate to Logic switches.
7. Create a new logic switch.
8. Name it R↑ using the multifunction knob.
9. Set the source by flipping the switch forwards/upwards.
10. Set Value to 20 %.
11. Set Function to A > X.
12. Create another logic switch and name it R→.
13. Set Function to |A| < X.
14. Set the source by flipping the switch to the middle position.
15. Set Value to 20 %.
16. (If 3-position) Create the last logic switch and name it R↓
17. Set Function to A < X.
18. Set the source by flipping the switch backwards/downwards.
19. Set Value to -20 %
20. Check if all the switches are working correctly.
21. You are now ready to roll.