Translations:KAVAN ET-01 Electric screwdriver - Instruction manual/6/en

From KAVAN RC Wiki
Revision as of 13:13, 9 June 2025 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  • Do not force the power tool. Use the correct power tool for your application.
  • Hold the power tool by gripping surfaces; never touch the ro tating parts!
  • Before you start the power tool, be sure the screwdriver bit is properly held by the chuck.
  • Hold the power tool securely. When tightening and loosening screws be prepared for temporarily high torque reactions.
  • The power tool is not designed for use on electric devices under power; always be sure any electric device you intend to work on has been switched off and unplugged from the mains outlet.
  • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
  • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instruc tions to operate the power tool.
  • Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
  • Keep handles and grasping surfaces dry, clean and free from oil and grease.
  • Recharge only with the USB charging cable supplied with the tool using the specified power supply.
  • When the power tool is not in use, keep it away from small metal objects, like paper clips, keys, nails, screws etc. that can make a connection from one terminal to another of the USB port.
  • Do not expose to extreme temperatures: fire, heat, direct sunli ght on hot days or freeze.
  • Under extreme usage or temperature conditions, battery le akage might occur. If on skin: flush with soap and plenty of water. If in the eyes, flush with plenty of clean water and seek medical attention.
  • Do not use a battery power tool that is damaged or modified.
  • Do not charge a battery power tool using a damaged charging cable.
  • Do not disassemble the power tool; the battery removal/repla cement may be performed by trained personnel only.
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_ET-01_Electric_screwdriver_-_Instruction_manual/6/en&oldid=33238"