Translations:KAVAN Vinx free flight glider 600mm kit - Instruction manual/96/en

Apply a coat of thin shrinking dope (diluted 1:1) to the entire surface of the wing; leave it dry a little bit. Once the dope is not sticky anymore, put the wing onto the jig and secure by modelling pins. Leave it pinned down until the dope is cured completely (depending on dope 12-24 hours). In total, apply 3 coats of thin shrinking dope and then 3 coats of thin protective dope. Lightly sand every layer (except for the last one) with No. 400-660 sand paper. You can apply the stickers then.